RTC 01

Artasie RTC AM1815 EVB AM1815SPIEVB

The Ambiq® real-time clock is the industry leader in power management, functioning as an extremely low power "keep-alive" source for the system and bypassing the need for the main MCU to power down the device to conserve power. It monitors the system while the components are powered off for a user-configurable power-up event while consuming only nanoamps of power.

Glossary
Artasie RTC AM1815 EVB AM1815SPIEVB

Features 02

Proprietary Calibration Algorithm

A proprietary calibration algorithm to digitally tune the RC and XT oscillator frequency with accuracy as low as 2 ppm.

3 Distinct Feature Groups

3 distinct feature groups: 1) baseline timekeeping; 2) advanced timekeeping and 3) power management.
Cutoff water canal

Reduce Sleep Current

Integrates a power switch with ~1 Ω impedance to cut-off ground current on the host MCU and reduce sleep current to <1 nA.

Low Power Requirements

Power requirements significantly lower than other RTCs.

Supports Multiple Modes

RC oscillator and Autocalibration modes are supported.

CMOS Platform

1st semiconductors based on Ambiq’s SPOT CMOS platform.

Companion for Host Processors

Serves as a companion part for host processors.
Artasie AM0815

With power requirements significantly lower than any other industry Real Time Clock (RTC), as low as 14 nA, AM0815 provides a ground-breaking combination of ultra-low power coupled with a highly sophisticated feature set.

Learn more
Full-Function RTC

Serves as a full-function RTC for host processors including microcontrollers (MCU) and System-on-Chip (SoC).

Embedded Power Management

Embedded power management features can operate as a backup device in both line-powered and battery-powered systems.

Watchdog Timer

Integrated with 256 bytes of general-purpose RAM and a Watchdog timer with hardware reset.

Artasie AM1815

Relying on the on-chip oscillators for minimum power consumption, the AM1815 comes with full RTC functions including battery backup and programmable counters, alarms for timer and watchdog functions, and an SPI serial interface for communication with a host controller.

Learn more
Companion for Host Processors

Serves as a companion part for host processors including microcontrollers, radios, and digital signal processor.

Embedded Power Management

Embedded power management features can operate as a backup device in both line-powered and battery-powered systems.

Watchdog Timer

Integrated with 256 bytes of general-purpose RAM and a Watchdog timer with hardware reset.

Preparing to download