The Ambiq® Artasie Real-Time Clock AM1805 with Power Management provides a groundbreaking combination of ultra-low power coupled with a highly sophisticated feature set. With power requirements significantly lower than any other industry RTC (as low as 14 nA), these are the first semiconductors based on Ambiq’s innovative SPOT® (Sub-threshold Power Optimized Technology) CMOS platform.
Serves as a companion part for host processors including microcontrollers, radios, and digital signal processors.
Includes three distinct feature groups: 1) baseline timekeeping, 2) advanced timekeeping, and 3) power management.
Baseline timekeeping feature group supports the standard 32.786 kHz crystal (XT) oscillation mode for maximum frequency accuracy with an ultra-low current draw of 55 nA.
A proprietary calibration algorithm allows the AM1805 to digitally tune the RC oscillator frequency and the XT oscillator frequency with accuracy as low as 2 ppm at a given temperature.
Advanced timekeeping feature group supports two additional oscillation modes: 1) RC oscillator mode, and 2) Autocalibration mode.
Includes a finite state machine that can control a host processor as it transitions between sleep/reset states and active states.
Integrates a power switch with ~1 Ω impedance that can be used to cut-off ground current on the host microcontroller and reduce sleep current to <1 nA.
Serves as a companion part for host processors including microcontrollers, radios, and digital signal processors.
Includes three distinct feature groups: 1) baseline timekeeping, 2) advanced timekeeping, and 3) power management.
Baseline timekeeping feature group supports the standard 32.786 kHz crystal (XT) oscillation mode for maximum frequency accuracy with an ultra-low current draw of 55 nA.
A proprietary calibration algorithm allows the AM1805 to digitally tune the RC oscillator frequency and the XT oscillator frequency with accuracy as low as 2 ppm at a given temperature.
Advanced timekeeping feature group supports two additional oscillation modes: 1) RC oscillator mode, and 2) Autocalibration mode.
Includes a finite state machine that can control a host processor as it transitions between sleep/reset states and active states.
Integrates a power switch with ~1 Ω impedance that can be used to cut-off ground current on the host microcontroller and reduce sleep current to <1 nA.
Ultra-Low Supply Current |
|---|
14 nA with RC oscillator |
22 nA with RC oscillator and Autocalibration |
55 nA with crystal oscillator |
Baseline Timekeeping |
|---|
4x GPIO Outputs |
32.768 kHz crystal oscillator with integrated load capacitor/resistor |
Counters for hundredths, seconds, minutes, hours, date, month, year, century, and weekday |
Alarm capability on all counters |
Programmable output clock generation (32.768 kHz to 1 year) |
Countdown timer with repeat function |
Automatic leap year calculation |
Download resources including Product Briefs, Selector Guides, White Paper, Case Studies, Analyst Reports, and more
Create an Ambiq Content Portal account to search for more documents.
or
Create an Ambiq Content Portal account to search for more documents.
