The Ambiq® Artasie Real-Time Clock AM0815 provides a ground- breaking combination of ultra-low power coupled with a highly sophisticated feature set. With power requirements significantly lower than any other industry RTC (as low as 14 nA), these are the first semiconductors based on Ambiq’s innovative SPOT® (Sub-threshold Power Optimized Technology) CMOS platform.
Serves as a full function RTC for host processors such as microcontrollers.
Includes three distinct feature groups: 1) baseline timekeeping, 2) advanced timekeeping, and 3) basic power management.
Baseline timekeeping feature group supports the standard 32.786 kHz crystal (XT) oscillation mode for maximum frequency accuracy with an ultra-low current draw of 55 nA.
A proprietary calibration algorithm allows the AM0815 to digitally tune the RC oscillator frequency and the XT oscillator frequency with accuracy as low as 2 ppm at a given temperature.
Advanced timekeeping feature group supports two additional oscillation modes: 1) RC oscillator mode, and 2) Autocalibration mode.
Power management features built into the AM0815 enable it to operate as a backup device in both line-powered and battery-powered systems.
Serves as a full function RTC for host processors such as microcontrollers.
Includes three distinct feature groups: 1) baseline timekeeping, 2) advanced timekeeping, and 3) basic power management.
Baseline timekeeping feature group supports the standard 32.786 kHz crystal (XT) oscillation mode for maximum frequency accuracy with an ultra-low current draw of 55 nA.
A proprietary calibration algorithm allows the AM0815 to digitally tune the RC oscillator frequency and the XT oscillator frequency with accuracy as low as 2 ppm at a given temperature.
Advanced timekeeping feature group supports two additional oscillation modes: 1) RC oscillator mode, and 2) Autocalibration mode.
Power management features built into the AM0815 enable it to operate as a backup device in both line-powered and battery-powered systems.
Ultra-Low Supply Current |
|---|
14 nA with RC oscillator |
22 nA with RC oscillator and Autocalibration |
55 nA with crystal oscillator |
Baseline Timekeeping |
|---|
3x GPIO Outputs |
32.768 kHz crystal oscillator with integrated load capacitor/resistor |
Counters for hundredths, seconds, minutes, hours, date, month, year, century, and weekday |
Alarm capability on all counters |
Programmable output clock generation (32.768 kHz to 1 year) |
Countdown timer with repeat function |
Automatic leap year calculation |
**Total battery series impedance = 1.5k ohms, which may require an external resistor
Download resources including Product Briefs, Selector Guides, White Paper, Case Studies, Analyst Reports, and more
Create an Ambiq Content Portal account to search for more documents.
or
Create an Ambiq Content Portal account to search for more documents.
